Toyota Celica 2005 Repair Manual page 2470

AC−46
10 mm (0.39 in.)
Hexagon
Wrench
Modulator
2 Layered
Part
Protrusion
2005 CELICA (RM1131U)
AIR CONDITIONING − CONDENSER
REPLACEMENT
REPLACE DRYER FROM MODULATOR
(a) Using a hexagon wrench (10 mm, 0.39 in.), remove the
cap from the modulator.
(b) Remove the filter from the modulator.
I10090
(c) Using pliers, remove the dryer.
I10092
(d) Insert a new dryer into the modulator.
NOTICE:
Do not remove the dryer from a vinyl bag until insert-
S
ing it into the modulator.
Install the dryer with its 2 layered part faced upward
S
to the modulator.
I10093
(e) Insert the filter into the modulator.
NOTICE:
Install the filter with its protrusion faced downward to the
modulator.
I10091
(f) Install the cap to the modulator.
(1) Apply compressor oil to the o−rings and screw part
of the cap.
Compressor oil: ND−OIL 8 or equivalent
(2) Using a hexagon wrench (10 mm, 0.39 in.), install
the caps.
Torque: 12.3 N·m (125 kgf·cm, 9 ft·lbf)
I10094
2469
AC22C−10