Redistribute Isis - Dell S6100 Configuration Manual

Version
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
pre- 6.2.1.1
Usage Information To redistribute the default route (0.0.0.0/0), configure the default-information originate command.
Related Commands
•

redistribute isis

Redistribute routing information from an IS-IS instance.
Syntax redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value]
[route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Parameters
tag
level-1
level-1-2
level-2
metric metric-value
route-map map-
name
Defaults Not configured.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
default-information originate
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and
Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number as the metric value. The range is
from 0 to 16.
(OPTIONAL) Enter the keywords route-map then the name of a configured route map.
— generates a default route for RIP traffic.
Routing Information Protocol (RIP) 1337