Match Ip Precedence - Dell S6100 Configuration Manual

match ip precedence

Use IP precedence values as a match criteria.
Syntax match {ip | ipv6 | ip-any} precedence ip-precedence-list [set-ip-dscp value]
To remove IP precedence as a match criteria, use the no match {ip | ipv6 | ip-any} precedence
ip-precedence-list [[multicast] set-ip-dscp value] command.
Parameters
ip
ipv6
ip-any
ip-precedence-list
set-ip-dscp value
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
1272 Quality of Service (QoS)
Enter the keyword ip to support IPv4 traffic.
Enter the keyword ipv6 to support IPv6 traffic.
Enter the keyword ip-any to support IPv4 and IPv6 traffic.
Enter the IP precedence value(s) as the match criteria. Separate values by commas — no
spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen (1-3). The range is from
0 to 7.
(OPTIONAL) Enter the keywords set-ip-dscp then the IP DSCP value. The matched
traffic is marked with the DSCP value. The range is from 0 to 63.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Added support for the ipv6 and ip-any options on the Z9000, S6000, S4820T, S4810,
MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the keyword multicast . Added support for the DSCP Marking option for the S-
Series.