Maximum-Paths - Dell S6100 Configuration Manual

maximum-paths

Set RIP to forward packets over multiple paths.
Syntax maximum-paths number
To return to the default values, use the no maximum-paths commands.
Parameters
number
Defaults 4
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
pre- 6.2.1.1
Usage Information RIP supports a maximum of 16 ECMP paths.
1330 Routing Information Protocol (RIP)
Enter the number of paths. The range is from 1 to 16. The default is 4 paths.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.