Clear Isis; Clns Host - Dell Force10 Z9000 Reference Manual

clear isis

Restart the IS-IS process. All IS-IS data is cleared.
E-Series, S4810
Syntax clear isis [tag] {* | database | traffic}
Parameters
tag
*
database
traffic
Command Modes EXEC Privilege
Command History
Version 8.3.12.0

clns host

Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system
IDs.
E-Series, S4810
Syntax clns host name nsap
Parameters
name
nsap
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0
Usage Use this command to configure a shortcut name that you can use instead of entering a long
Information string of numbers associated with an NSAP address.
Related hostname dynamic
Commands allows the routers to advertise the host names in LSPs.
858
(Optional) Enter an alphanumeric string to specify the IS-IS routing
tag area.
Enter the keyword * to clear all IS-IS information and restart the IS-IS
process. This command removes IS-IS neighbor information and IS-IS
LSP database information and the full SPF calculation is done.
Clears IS-IS LSP database information.
Clears IS-IS counters.
Introduced on the S4810.
Enter an alphanumeric string to identify the name-to-NSAP mapping.
Enter a specific NSAP address that is associated with the name
parameter.
Introduced on the S4810.
– enables dynamic learning of host names from routers in the domain and