Redistribute Ospf - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
pre- 6.2.1.1

redistribute ospf

Redistribute routing information from an OSPF process.
Syntax redistribute ospf process-id [match external {1 | 2} | match internal | metric
metric-value] [route-map map-name]
To disable redistribution, use the no redistribute ospf process-id [match external {1 | 2} |
match internal | metric metric-value] [route-map map-name] command.
Parameters
process-id
match external {1 |
2}
match internal
metric metric-value
route-map map-
name
Defaults Not configured.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
1338 Routing Information Protocol (RIP)
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Enter a number that corresponds to the OSPF process ID to redistribute. The range is
from 1 to 65355.
(OPTIONAL) Enter the keywords match external then the numbers 1 or 2 to
indicated that external 1 routes or external 2 routes should be redistributed.
(OPTIONAL) Enter the keywords match internal to indicate that internal routes
should be redistributed.
(OPTIONAL) Enter the keyword metric then a number as the metric value. The range is
from 0 to 16.
(OPTIONAL) Enter the keywords route-map then the name of a configured route map.
Description
Introduced on the S6100-ON.