Clear Isis - Dell S4810 Reference Manual

Related copy
Commands

clear isis

Restart the IS-IS process. All IS-IS data is cleared.
S4810
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag
*
database
traffic
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Intermediate System to Intermediate System (IS-IS)
— saves the current configuration to another location.
(Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
Enter the keyword * to clear all IS-IS information and restart
the IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full
SPF calculation is done.
Clears IS-IS LSP database information.
Clears IS-IS counters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
965