Redistribute - Dell S6100 Configuration Manual

Version
9.0.2.0
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.8.1.0
7.6.1.0
pre- 6.2.1.1
Usage Information Although the passive interface does not send or receive routing updates, the network on that interface still
includes in RIP updates sent using other interfaces.
Related Commands
•
•

redistribute

Redistribute information from other routing instances.
Syntax redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
connected
static
Defaults Not configured.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
1336 Routing Information Protocol (RIP)
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the E-Series.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
neighbor — enables RIP for a specified network.
network — defines a neighbor.
Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
Enter the keyword static to specify that information from static routes is redistributed.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.