Dell S6100 Configuration Manual page 1263

dot1p
0
1
2
3
4
5
6
7
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.6.1.0
7.5.1.0
6.5.1.0
6.1.1.1
Usage Information
To honor all incoming 802.1p markings on incoming switched traffic on the interface, enter this command. By
default, this facility is not enabled (that is, the 802.1p markings on incoming traffic are not honored).
Queue ID
1
0
2
3
4
5
6
7
INTERFACE
CONFIGURATION
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the kbps option on the C-Series, E-Series, and S-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded the command to permit configuration on port channels.
Introduced on the E-Series.
Quality of Service (QoS) 1263