Show Alarms - Dell S6100 Configuration Manual

msec
show-timezone
uptime
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage Information If you do not specify parameters and enter service timestamps, it appears as service timestamps debug uptime in
the running-configuration.
To view the current options set for the service timestamps command, use the show running-config
command.

show alarms

View alarms currently active in the system.
Syntax show alarms [threshold]
Parameters
threshold
122 Control and Monitoring
(OPTIONAL) Enter the keyword msec to include milliseconds in the timestamp.
(OPTIONAL) Enter the keyword show-timezone to include the time zone information
in the timestamp.
(OPTIONAL) Enter the keyword uptime to have the timestamp based on time elapsed
since system reboot.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
(OPTIONAL) Enter the keyword threshold to display the temperature thresholds in
Celsius for each level.