Dot1X Auth-Server - Dell S6100 Configuration Manual

After the authentication VLAN is assigned, the port-state must be toggled to restart authentication. Authentication
occurs at the next reauthentication interval (dot1x reauthentication).
Related Commands
•
•
•

dot1x auth-server

Configure the authentication server to RADIUS.
Syntax dot1x auth-server radius
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0
dot1x auth-type mab-only
To authenticate a device with MAC authentication bypass (MAB), only use the host MAC address.
Syntax dot1x auth-type mab-only
Defaults Disabled
Command Modes INTERFACE
dot1x port-control — enable port control on an interface
dot1x guest-vlan — configure a guest VLAN for limited access users or for devices that are not 802.1X capable.
show dot1x interface — display the 802.1X configuration of an interface.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
802.1X 157