Dell S6100 Configuration Manual page 141

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.11.4
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.6.1.0
Example (show
system brief)
Example
Dell#show system stack-unit 1
--
Unit Type
Status
Next Boot
Required Type
Current Type
Master priority
Hardware Rev
Num Ports
Up Time
Dell Networking OS Version : 1-0(0-4703)
Jumbo Capable
POE Capable
FIPS Mode
Boot Flash
Boot Selector
Memory Size
Temperature
Voltage
Serial Number
Part Number
Vendor Id
Date Code
Country Code
Piece Part ID
PPID Revision
Description
Introduced on the S6100-ON.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Added support for the disabled-ports parameter .
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
The brief parameter no longer displays the current Reload mode. To display Reload
mode, use the show reload-type command. Modified the show system stack-
unit command output to support Piece Part ID (PPID).
Introduced on the Z9000.
Introduced on the S4810.
The Boot Flash field displays the code level for boot code 2.8.1.1 and newer, while older
boot codes display as "Present".
Added Master Priority field.
Introduced on the S-Series.
Unit 1 --
: Management Unit
: online
: online
: S6100-ON - 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/HU G
: S6100-ON - 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/HU G
: NA
: 0.0
: 130
: 2 day, 19 hr, 27 min
: yes
: no
: disabled
: 3.25.2.2
: 3.25.0.3
: 3177226240 bytes
: 32C
: ok
: NA
: 03GXNM Rev X01
: NA
: NA
: NA
: CN-03GXNM-77931-585-0005
: X01
Control and Monitoring 141