Dell S6100 Configuration Manual page 136

Version
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
Usage Information
Field
Source QID /Tx
Process
Destination QID/Rx
Process
Cur Len
High Mark
#of to / Timeout
#of Retr /Retries
#msg Sent/Msg
Sent/
#msg Ackd/Ack
Rcvd
Retr /Available
Retra
Total/ Max Retra
Important Points:
•
•
•
•
•
Example
Dell#show processes ipc flow-control cp
Q Statistics on CP Processor
TxProcess RxProcess Cur High Time Retr Msg
ACL0
ACL0
ACL0
LACP0
DHCP0
136 Control and Monitoring
Description
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Description
Source Service Identifier
Destination Service Identifier
Current number of messages enqueued
Highest number of packets in the queue at any time
Timeout count
Number of retransmissions
Number of messages sent
Number of messages acknowledged
Number of retries left
Number of retries allowed
The SWP provides flow control-based reliable communication between the sending and receiving software
tasks.
A sending task enqueues messages into the SWP queue3 for a receiving task and waits for an
acknowledgement.
If no response is received within a defined period of time, the SWP timeout mechanism resubmits the message
at the head of the FIFO queue.
After retrying a defined number of times, the SWP-2-NOMORETIMEOUT timeout message is generated.
In the S-Series example, a retry (Retries) value of zero indicates that the SWP mechanism reached the
maximum number of retransmissions without an acknowledgement.
Len Mark Out
RTM0 0 0
DIFFSERV0 0 0
SNMP0 0 0
IFMGR0 0 0
ACL0 0 0
Ack Aval
ies Sent Rcvd Retra Retra
0 0 0 0 10
0 0 0 0 10
0 0 0 0 10
0 0 0 0 25
0 0 0 0 25
Max
10
10
10
25
25