Dot1X Max-Supplicants - Dell S6100 Configuration Manual

Parameters
number
Defaults 2
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0

dot1x max-supplicants

Restrict the number of supplicants that can be authenticated and permitted to access the network through the port. This configuration is
only takes effect in Multi-auth mode.
Syntax dot1x max-supplicants number
Parameters
number
Defaults 128 hosts can be authenticated on a single authenticator port.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
Enter the number of times an EAP request is transmitted before a session time-out. The
range is from 1 to 10. The default is 2.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter the number of supplicants that can be authenticated on a single port in Multi-auth
mode. The range is from 1 to 128. The default is 128.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
802.1X 165