Show Inventory - Dell S6100 Configuration Manual

1
-- Unit Environment Status
Unit
------------------------------------
* 1
* Management Unit
--
Unit
----------------------------------------------------
1
1
1
1
--
Unit
---------------------------------------------------------------------------------------
1
Dell#
Dell#show environment fan
--
Unit
------------------------------------------
1
1
1
1
Speed in RPM
Dell#
Dell#show environment thermal-sensor
--
Unit
---------------------------------------------------------------------------------------
1
Dell#

show inventory

Display the switch type, components (including media), and Dell Networking Operating System (OS), including hardware identification
numbers and configured protocols.
Syntax show inventory [media slot]
Parameters
media slot
Defaults none
Command Modes CONFIGURATION
2 up
Status Temp
online 32C
Optional Modules Environment Status (deg C) --
Module Temperature
1 36
2 38
3 36
4 37
Thermal Sensor Readings (deg C)
CpuOnBoard Bcm56960_F SysInt Bcm56960_R SwitchOn FP-GE
32 36
Fan Status --
Bay TrayStatus
1 up
2 up
3 up
4 up
Thermal Sensor Readings (deg C)
CpuOnBoard Bcm56960_F SysInt Bcm56960_R SwitchOn FP-GE
32 36
(OPTIONAL) Enter the keyword media then the stack ID of the stack member for which
you want to display pluggable media inventory.
NOTE:
Operating System version 8.3.11.4. Because stacking is not supported, if you
use this parameter, the output displays "Media not present or accessible"
(refer to the
AC up 12112
--
Voltage
ok
--
32 38
Fan1 Speed
up 7680
up 7710
up 7605
up 7635
--
32 38
This parameter is available but not supported in Dell Networking
Usage Information section).
FP-SFP+
34 34 31
FP-SFP+
34 34 31
Control and Monitoring
Bcm_Int Cpu_Int
53 30
Bcm_Int Cpu_Int
52 29
127