Dell S6100 Configuration Manual page 223

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(2.0P0)
9.11(0.0)
9.10(0.1)
9.10(0.0)
9.10(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.8(0.0)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
7.4.1.0
6.5.10
Usage Information
The monitor option is relevant in the context of flow-based monitoring only. For more information, refer to
Monitoring.
The order option is relevant in the context of the Policy QoS feature only. The following applies:
•
•
•
•
Description
Included support for using logical names of a protocol to configure an IP access list in
both TCP and UDP on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Added support for session–ID to the monitor parameter.
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S3148.
Introduced on the S6100-ON.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added the no-drop parameter.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Add the DSCP value for ACL matching.
Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Added support for the non-contiguous mask and added the monitor option. Deprecated
the keyword established.
Expanded to include the optional QoS order priority for the ACL entry.
The seq sequence-number command is applicable only in an ACL group.
The order option works across ACL groups that are applied on an interface via the QoS policy framework.
The order option takes precedence over seq sequence-number.
If you do not configure sequence-number, the rules with the same order value are ordered according to
their configuration order.
Access Control Lists (ACL)
Port
223