Traceroute - Dell S6100 Configuration Manual

Parameters
screen-length
Defaults 24 lines
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series

traceroute

View a packet's path to a specific device.
Syntax
traceroute {host | vrf instance | ip-address | ipv6-address}
Parameters
host
vrf instance
ip-address
ipv6-address
Enter a number of lines. Entering zero causes the terminal to display without pausing. The
range is from 0 to 512.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Enter the name of device.
(Optional) E-Series Only: Enter the keyword vrf then the VRF Instance name.
Enter the IP address of the device in dotted decimal format.
Enter the IPv6 address, in the x:x:x:x::x format, to which you are testing connectivity.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Control and Monitoring 149