Debug Frrp - Dell Z9500 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
Usage Executing this command without the optional ring-id command clears the
Information statistics counters on all the available rings. The system requires a command line
confirmation before the command executes. This command clears the following
counters:
•
•
•
Example
Dell#clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related show frrp
Commands

debug frrp

Clear the FRRP statistics counters.
Z9500
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail}
{ring-id} [countnumber] command.
Parameters
event
Force10 Resilient Ring Protocol (FRRP)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
— displays the Resilient Ring Protocol configuration.
Enter the keyword event to display debug information
related to ring protocol transitions.
753