Show Debugging - Dell S6100 Configuration Manual

No CPU traffic statistics.
Dell#

show debugging

View a list of all enabled debugging processes.
Syntax show debugging
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Example
Dell# show debug
Generic IP:
IP packet debugging is on for
Dell#
show environment
View system component status (for example, temperature or voltage).
Syntax show environment [all | fan | pem | stack-unit unit-id | thermal-sensor |
optional-module ]
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series
Original command.
ManagementEthernet 1/1
Port-channel 1-2
Port-channel 5
TenGigabitEthernet 1/1/1/1-1/1/1/3,1/1/5/1-1/1/5/2,1/1/3/1-1/1/3/2,1/1/5/4
Control and Monitoring 125