Dell S6100 Configuration Manual page 192

monitor
fragments
no-drop
Defaults Not configured.
Command Modes CONFIGURATION-STANDARD-ACCESS-LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.8(0.0)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
7.4.1.0
6.5.1.0
Usage Information
The order option is relevant in the context of the Policy QoS feature only. For more information, see the Quality
of Service section in the Dell Networking OS Configuration Guide.
192 Access Control Lists (ACL)
numbers have higher priority). If you do not use the keyword order, the ACLs have the
lowest order by default (255).
(OPTIONAL) Enter the keyword monitor then the session–ID to describe the traffic
that you want to monitor and the ACL in which you are creating the rule is applied to the
monitored interface. The session–ID range is from 0 to 65535.
NOTE: For more information, see "Flow-based Monitoring" in the Port
Monitoring section of the
Enter the keyword fragments to use ACLs to control packet fragments.
Enter the keywords no-drop to match only the forwarded packets.
Description
Added support for session–ID to the monitor parameter.
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added the no-drop parameter.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Add the DSCP value for ACL matching.
Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Added support for the non-contiguous mask and added the monitor option.
Expanded to include the optional QoS order priority for the ACL entry.
Dell Networking OS Configuration Guide .