Clear Counters Ip Access-Group - Dell S6100 Configuration Manual

clear counters ip access-group

Erase all counters maintained for access lists.
Syntax clear counters ip access-group [access-list-name]
Parameters
access-list-name
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.2.1.1
feature aclrange
Enable the ACL range option.
Syntax feature aclrange
Use the no feature aclrange command to disable the option.
Defaults None
Command Modes CONFIGURATION
(OPTIONAL) Enter the name of a configured access-list, up to 140 characters.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to
16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Access Control Lists (ACL) 185