Debug Frrp - Dell C9000 Series Reference Manual

Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related show frrp
Commands

debug frrp

Clear the FRRP statistics counters.
C9000 Series
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail}
{ring-id} [countnumber] command.
Parameters
event
packet
detail
ring-id
count number
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
— displays the Resilient Ring Protocol configuration.
Enter the keyword event to display debug information related
to ring protocol transitions.
Enter the keyword packet to display brief debug information
related to control packets.
Enter the keyword detail to display detailed debug information
related to the entire ring protocol packets.
(Optional) Enter the ring identification number. The range is
from 1 to 255.
Enter the keyword count then the number of debug outputs.
The range is from 1 to 65534.
Description
Introduced on the C9010.
Introduced on the Z9500.
Force10 OS Resilient Ring Protocol (FRRP) 885