Dell S6100 Configuration Manual page 163

Version
8.4.1.0
8.3.2.0
Usage Information
•
•
•
Related Commands
•
mac
Configure a list of supplicant MAC addresses for dot1x profile represented with a profile-name.
Syntax [no] mac {mac-address1 mac-address2... mac-address6}
Parameters
mac-address1 mac-
address2... mac-
address6
Defaults None
Command Modes
DOT1X PROFILE CONFIG (conf-dot1x-profile)
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
Usage Information
The mac command configures a list of supplicant MAC addresses for a dot1x profile represented with a profile-
name. You can configure up to 6 MAC addresses in a single mac command. The maximum number of MAC
addresses that you can configure in a single profile is limited to 100.
Use this command in Configuration Terminal Batch mode to configure a list of supplicant MAC addresses for dot1x
profile in a dual-homing setup.
Example
Dell(conf)#dot1x profile mySupplicants
Dell(conf-dot1x-profile)#mac 00:50:56:AA:01:10 00:50:56:AA:01:11
Description
Added the multi-auth option on the C-Series and S-Series.
Added the single-host and multi-host options on the C-Series, E-Series, and S-
Series.
Single-host mode authenticates only one host per authenticator port and drops all other traffic on the port.
Multi-host mode authenticates the first host to respond to an Identity Request and then permits all other
traffic on the port.
Multi-supplicant mode authenticates every device attempting to connect to the network on the authenticator
port.
show dot1x interface — display the 802.1X configuration of an interface.
Enter the keyword mac and type the 48– bit MAC addresses using the H.H.H format. A
maximum of 6 MAC addresses are allowed.
Description
Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000, S6000,
S6000–ON, S6100–ON, the Configuration Terminal Batch mode on C9010, Z9100–ON,
and Z9500.
Introduced on the C9010.
802.1X 163