Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN
----
100
show fip-snooping enode
Display information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC address,
FCF MAC address, VLAN ID and FC-ID.
C9000 Series
Syntax
show fip-snooping enode [enode-mac enode-mac-address]
Parameters
enode-mac-
address
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
8.3.19.0
8.3.12.0
Usage Information The following describes the show fip-snooping enode command shown in the
following example.
Field
ENode MAC
ENode Interface
FCF MAC
VLAN
Enabled
FC-MAP
-------
--------
TRUE
0X0EFC00
Enter the MAC address of the ENodes to display.
•
EXEC
•
EXEC Privilege
Description
Inroduced on the C9010.
Introduced on the S4820T.
Introduced on the S4810.
Description
MAC address of the ENode.
Slot/ port number of the interface connected to the ENode.
MAC address of the FCF.
VLAN ID number the session uses.
FCoE Transit
861