Show Fip-Snooping Config; Show Fip-Snooping Enode - Dell Z9500 Reference Manual

show fip-snooping config

Display the FIP snooping status and configured FC-MAP values.
Z9500
Syntax
show fip-snooping config
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
8.3.19.0
Version 8.3.12.0
Example
Dell# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN
----
100

show fip-snooping enode

Display information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID and FC-ID.
Z9500
Syntax
show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address
Command
•
Modes
•
FCoE Transit
EXEC
EXEC Privilege
Description
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
Enabled FC-MAP
------- --------
TRUE 0X0EFC00
Enter the MAC address of the ENodes to display.
EXEC
EXEC Privilege
743