Ip Addressing Commands; Clear Host Dhcp; Ip Address - Dell PowerConnect 5324 Command Line Interface Reference Manual

IP Addressing Commands

clear host dhcp

The clear host dhcp Privileged EXEC mode command deletes entries from the host name-to-
address mapping received from Dynamic Host Configuration Protocol (DHCP).
Syntax
clear host dhcp {name | *}
• name—Particular host entry to remove. (Range: 1 - 158 characters.)
• *— Removes all entries.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• This command would delete the host name-to-address mapping temporarily until the next
renew of the IP address.
Examples
The following example deletes all entries from the host name-to-address mapping.
Console# clear host dhcp *

ip address

The ip address Interface Configuration mode command sets an IP address. To remove an IP
address, use the no form of this command.
Syntax
ip address ip-address {mask | prefix-length}
no ip address [ip-address]
• ip-address—IP address
• mask—Specifies the network mask of the IP address. (Range: Valid Subnet mask)
IP Addressing Commands
157