Clear Host - Dell Z9500 Command Reference Manual

clear host

Remove one or all dynamically learned host table entries.
Z9500
Syntax
clear host name
Parameters
name
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
clear ip fib linecard
Clear all FIB entries on a Z9500 line card (use this command with caution; refer to Usage Information.)
Z9500
Syntax
clear ip fib linecard slot—id
Parameters
linecard slot-id
930
Enter the name of the host to delete. Enter * to delete all
host table entries.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the slot ID of a Z9500 line card. Valid slot IDs are from
0 to 2.
IPv4 Routing