pre-Version
6.2.1.1
clear host
Remove one or all dynamically learned host table entries.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear host name
Parameters
name
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
clear ip fib linecard
Clear all forwarding information base (fib) entries in the specified line card (use this command with caution, refer to
Usage Information below).
C-Series, E-Series
Syntax
clear ip fib linecard slot-number | vrf vrf instance
Parameters
slot-number
vrf instance
Command Modes
774
Introduced on the E-Series.
Enter the name of the host to delete. Enter * to delete all host table
entries.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the number of the line card slot. The range is 0 to 7.
(Optional) E-Series Only: Clear only the FIB entries on the specified
card associated with the VRF instance.
•
EXEC
•
EXEC Privilege