Clear Host - Dell S4810 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage Use this command to create a mapping between a host name server and its IP
Information addresses for a specific VRF.
Example
Dell(conf)#ip host vrf jay dell 1.1.1.1

clear host

Removes one or all dynamically learned host table entries for a specific VRF.
S4810
Syntax
clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name
host-name
*
Defaults None
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage Use this command to delete one or all dynamically learned host table entries
Information corresponding to a specific VRF.
Example
Dell#clear host vrf jay dell
Dell#clear host
Dynamic Host Configuration Protocol (DHCP)
Introduced on the S-Series and Z-Series.
(Optional) Enter the key word vrf and then the name of the
VRF to delete dynamically learned host table entries
corresponding to that VRF.
Enter the name of the host corresponding to which you
want to delete the dynamically learnt host table entries.
Enter * to delete all host table entries.
Introduced on the S-Series and Z-Series.
vrf jay *
635