Exec-Timeout - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Related Commands
•

exec-timeout

Set a time interval that the system waits for input on a line before disconnecting the session.
Syntax exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Parameters
minutes
seconds
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Original command.
exit — returns to the lower command mode.
Enter the number of minutes of inactivity on the system before disconnecting the current
session. The range is from 0 to 35791. The default is 10 minutes for the console line and
30 minutes for the VTY line.
(OPTIONAL) Enter the number of seconds. The range is from 0 to 2147483. The default is
0 seconds.
Description
Introduced on the S6100-ON.
Control and Monitoring 97