Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Console(config)#
clear host
Use the clear host Privileged EXEC mode command to delete entries from
the host name-to-address cache.
Syntax
{name | *}
clear host
Parameters
•
name—Specifies the host entry to remove. (Length: 1–158 characters.
Maximum label length: 63 characters
•
* —Removes all entries.
Command Mode
Privileged EXEC mode
Example
The following example deletes all entries from the host name-to-address
cache.
Console#
clear host *
clear host dhcp
Use the clear host dhcp Privileged EXEC mode command to delete entries
from the host name-to-address mapping received from Dynamic Host
Configuration Protocol (DHCP).
Syntax
clear host dhcp
Parameters
name —Specifies the host entry to remove. (Length: 1–158 characters.
•
Maximum label length: 63 characters
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
620
IP Addressing Commands
CLI\files\IP_Addressing.fm
accounting.website.com 176.10.23.1
ip host
{name | *}
)
)
Advertisement
Table of Contents
