Verify - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.0.2.0
9.0(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
Usage Information
You must reload Dell Networking OS after executing this command.
Example
Dell#upgrade boot ?
all
bootflash-image
bootselector-image
Dell#

verify

Validate the software image on the flash drive after the image has been transferred to the system, but before the image has been installed.
Syntax verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters
md5
sha256
flash://
img-file
hash-value
Defaults flash drive
Command Modes EXEC mode
Command History Version 9.5.(0.0)
Version
9.10(0.0)
9.8(1.0)
9.5(0.0)
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S6000.
Added support for IPv6 for the file-url parameter.
Introduced on the S4820T.
Introduced on the Z9000. Added support for the SSD on the Z9000 only.
Introduced on the S4810.
Added support for TFTP and SCP.
Introduced on the S-Series.
Upgrade both boot flash image and selector image
Upgrade boot flash image
Upgrade boot selector image
Enter the md5 keyword to use the MD5 message-digest algorithm.
Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm
(Optional). Enter the flash:// keyword. The default is to use the flash drive. You can
just enter the image file name.
Enter the name the Dell Networking software image file to validate.
(Optional). Enter the relevant hash published on i-Support.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
File Management 83