Ftp-Server Enable - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Related Commands
•

ftp-server enable

Enable FTP server functions on the system.
Syntax ftp-server [vrf vrf-name] enable
Parameters
vrf vrf-name
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
end — returns to EXEC Privilege mode.
Enter the keyword vrf and then the name of the VRF to enable the FTP server to listen
to that VRF instance.
NOTE:
accept client connections. If no VRF is specified, then the default VRF is
used.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Use this attribute to specify the VRF that is used by the FTP server to
Control and Monitoring 99