Control And Monitoring - Dell S6100 Configuration Manual

This section contains command information to configure and monitor the system, including Telnet, file transfer protocol (FTP), and trivial
file transfer protocol (TFTP).
banner exec
Configure a message that is displayed when your enter EXEC mode.
Syntax banner exec c line c
To delete a banner, use the no banner exec command.
Parameters
c
line
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0

Control and Monitoring

Enter the keywords banner exec, then enter a character delineator, represented here
by the letter c. Press ENTER.
Enter a text string for your banner message ending the message with your delineator. In
the following example, the delineator is a percent character (%); the banner message is
"testing, testing".
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
4
Control and Monitoring 85