Canon imageRUNNER ADVANCE 6075 Series Service Manual page 125

2
Technology > Image Formation System > Controls > Waste Toner Feeding Area
This machine performs black band control in order to maintain the drum cleaning
performance.
Therefore the criterion of the full Waste Toner Container varies according to the environment
and the image duty as shown in the following table.
Temperature/ Moisture 0 to less
Humidity content than 1.0
than 2.0
23 deg C / 5% 0.86
23 deg C / 10% 1.73
1,000,000 pages
23 deg C / 30% 5.8
23 deg C / 50% 8.9
27 deg C / 70% 15
750,000 700,000
28 deg C / 75% 18
pages
30 deg C / 80% 21.6
Status Waste toner level
Warning for full level of waste toner Approx. 83% of the full criterion Printing can be continued
Full level of waste toner Full criterion
The Drive Gear escapes when a certain load is applied to the Waste Toner Feeding Screw
and an error is displayed after the Host Machine has been stopped.
2 Technology > Image Formation System > Controls > Waste Toner Feeding Area
Image duty (%)
1.0 to 2.0 to 3.0 to 4.0 to 5.0 to 6.0
less less less less
than 3.0 than 4.0 than 5.0
800,000 700,000 600,000
pages pages pages
600,000
500,000 to 550,000 pages
pages pages
Operation
Host machine is
stopped(error display)
● Waste Toner Feed Screw Lock Detection
To detect lock state of the Waste Toner Feed Screw.
The drive by the Developing Motor (M2) is transmitted to the Screw Gear, which makes
the Waste Toner Screw rotate. When this Screw Gear becomes unable to rotate, it slides
sideways by the transmitted drive force.
The Screw Gear fails to rotate once the Waste Toner Screw is locked; therefore, the
transmitted drive force makes the Screw Gear slide sideways. The Waste Toner Lock
Detection Switch (SW5) is placed by the side of the Screw Gear and SW5 is pressed when
the Screw Gear is moved. With this mechanism, it is detected that the Waste Toner Screw is
locked.
<Related error code>
E013-0001 Error in Waste Toner Lock Detection Connector disconnection
E013-0002 Error in Waste Toner Feed Screw Lock detection
T-2-41
● Waste Toner Container Detection
The Waste Toner Container detection is not performed with this machine.
T-2-42
2-71
2-71