Waste Toner Feeding Area - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Image Formation System > Controls > Waste Toner Feeding Area
Toner level Status Message
5% or less Replace the toner
cartridge.
(Job is stopped.)
TS2 TS3
TS1
*) The number 900 sheets is a logical value derived from calculation; thus, it varies approx.
30%. In addition, with Service Mode > COPIER > OPTION > FNC-SW > T-RUN-LV, approx.
140 sheets can be printed (with 30% of variation).
2 Technology > Image Formation System > Controls > Waste Toner Feeding Area
Operation
After "Replace the toner cartridge."
message is displayed, and approx. 900
sheets *) are printed, toner stops to be
supplied to the Developing Assembly
and the message prompting to replace
the Toner Container is displayed on the
whole screen of Control Panel. After the
Toner Container is replaced, the toner
level returns to 100%.
T-2-40

■ Waste Toner Feeding Area

● Waste Toner Full Level Detection
The waste toner of the Drum Cleaning Unit and the ETB Unit is fed to the Waste Toner
Container. There is no sensor to detect toner level in the Waste Toner Container and the toner
level is detected by the video count (1-count per 1 sheet with 6% image).
Drum Cleaning Unit
M2
ETB cleaning
Unit
2-70
Waste Toner Feed Screw
Waste Toner
Container
Waste Toner
F-2-97
2-70