Delcon - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

delcon

Delete Connection
Use the
Syntax
delcon <port_num.vpi.vci>
Syntax Description
port_num
vpi
vci
Related Commands
addcon, cnfcon, dncon, dspcon, dspcons, rrtcon, tstcon, upcon
Attributes
Log: Yes
Example
Delete connection 100/100 from port 1.
PXM1E_SJ.1.4.AUSMB8.a > delcon 1.100.100
PXM1E_SJ.1.4.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
command to remove a connection from the AUSM card.
delcon
Enter the port number for the connection you want to delete. To display a list of
configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 2
delcon
4-97