Delport - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

delport

Delete Port
Use the delport command to remove ATM services from a line on an AUSM card.
Syntax
delport <port_num>
You cannot use the delport command to delete a port number used by an IMA group. To delete an IMA
Note
group, use the delimagrp command.
Syntax Description
port_num
Related Commands
addport, dspport, dspports
Attributes
Log: Yes
Example
Delete port 8 on an AUSM card.
PXM1E_SJ.1.1.AUSMB8.a > delport 8
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Number of the port to be deleted. Use the dspports command to display the
configured ports.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
delport
4-103