Honda ACCORD HYBRID 2005 Service Manual page 1059

I n p u t S h a f t ( M a i n s h a f t ) S p e e d O u t p u t S h a f t ( C o u n t e r s h a f t ) S p e e d
S e n s o r R e p l a c e m e n t S e n s o r R e p l a c e m e n t
1. Disconnect the input shaft (mainshaft) speed
sensor connector, and remove the input shaft
(mainshaft) speed sensor.
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
2. Install the new O-ring (A) on the new input shaft
(mainshaft) speed sensor (B), then install the input
shaft (mainshaft) speed sensor in the transmission
housing.
3. Check the connector for rust, dirt, or oil, then
connect the connector securely.
1. Disconnect the output shaft (countershaft) speed
sensor connector, and remove the output shaft
(countershaft) speed sensor.
2. Install the new O-ring (A) on the new output shaft
(countershaft) speed sensor (B), then install the
output shaft (countershaft) speed sensor and
sensor washer (C) in the transmission housing.
3. Check the connector for rust, dirt, or o i l , then
connect the connector securely.
14-223