Honda ACCORD HYBRID 2005 Service Manual page 1141

5. Install the 29 x 39 x 9.5 m m bearing into the torque
converter housing w i t h the special tools.
07749-0010000
6. Install the new O-rings (A) on the ATF guide collar
(B), then install the guide collar in the torque
converter housing.
7. Install the bearing in the direction s h o w n in the
housing w i t h the special tools.
8. Check that the bearing groove aligns w i t h the set
plate m o u n t i n g surface, then install the set plate (A)
by aligning it w i t h the bearing groove.
6 x 1.0 mm
12 N-m (1.2 k g f m , 8.7 Ibfft)
9. Install the new lock washer (B) and bolt, then bend
the lock tab of the lock washer against the bolt head.
14-305