Honda ACCORD HYBRID 2005 Service Manual page 1174

Shafts and Clutches
C l u t c h C l e a r a n c e I n s p e c t i o n ( c o n t ' d )
6. Install the disc spring (A) on the 1st-hold clutch
plate B in the direction s h o w n . Starting w i t h the 1st
clutch waved-plate, alternately install the w a v e d -
plates (B) (5) and discs (C) (5) in the 1st clutch d r u m
(D), then install the clutch-end-plate (E) w i t h the flat
side d o w n .
7. Install the clutch pistons in the 2 n d , 3rd, 4th, and
5th clutch drums. Do not install the O-rings on the
clutch pistons during inspection.
8. Starting w i t h the 2nd clutch flat-plate, alternately
install the flat-plates (A) (4) and discs (B) (4), and
alternately install the waved-plates (C) (3) and discs
(B) (3) in the 2nd clutch d r u m (D). Install the clutch-
end-plate (E) w i t h the flat side d o w n on the top disc.
9. Install the disc spring (A) in the 3rd clutch d r u m (B)
in the direction s h o w n . Starting w i t h the 3rd clutch
flat-plate, alternately install the flat-plates (C) (3)
and discs (D) (3), and alternately install the w a v e d -
plates (E) (2) and discs (D) (2). Install the clutch-end-
plate (F) w i t h the flat side d o w n on the t o p disc.
14-338