Honda ACCORD HYBRID 2005 Service Manual page 659

28. Turn the ignition switch ON (II).
29. Reset the PCM w i t h the HDS.
30. Do the PCM idle learn procedure (see page 11-340).
3 1 . Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0453 is indicated, check for poor
connections or loose terminals at the FTP sensor
and the PCM, then go to step 1. If any other
T e m p o r a r y DTCs or DTCs are indicated, go to the
indicated D T C s troubleshooting.
N O — G o t o step 32.
32. M o n i t o r the OBD STATUS for DTC P0453 in the
DTCs MENU w i t h the HDS.
Does the screen indicate PASSED?
Y E S — T r o u b l e s h o o t i n g is complete. •
NO—If the screen indicates FAILED, check for poor
connections or loose terminals at the FTP sensor
and the PCM, then go to step 1. If the screen
indicates NOT COMPLETED, go to step 30 and
recheck.
33. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
34. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0453 is indicated, check for poor
connections or loose terminals at the FTP sensor
and the PCM, then go to step 1. If any other
T e m p o r a r y DTCs or DTCs are indicated, go to the
indicated D T C s troubleshooting.
NO—If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-219). •