26. Attach the front subframe adapter to the subframe
(A) by hanging the belt (B) over the front of the
subframe, then install the lockpin (C) and tighten
the w i n g n u t (D).
27.
28.
EQS02C000016
Raise the jack (E) and line up the slots in the arms
w i t h the bolt holes on the corner of the jack base,
then attach t h e m w i t h bolts securely.
Support the engine and the transmission w i t h the
jack stand (A).
29. Remove the subframe right middle m o u n t i n g bolts
(A).
10 x 1.25 mm
30. Remove the subframe left middle m o u n t i n g (A).
1 0 x 1 . 2 5 m m
A
12 x 1.25 m m
(cont'd)
17-51