Honda ACCORD HYBRID 2005 Service Manual page 1179

0 ®
7. Install the 5th clutch return spring (A) on the clutch
piston w h i l e positioning the spring end (B) in the
range <C) of the reference marks (D) on the piston.
8. Install the spring retainer (E) on the return spring,
and position the snap ring (F) on the retainer.
9. Install the special tools.
, « v / 0 7 L A E - P X 4 0 1 0 0
07LAE-PX40100 or
07HAE-PL50101
10. Be sure the special tool (A) is adjusted to have full
contact w i t h the spring retainer (B) on the 1st, 2nd,
and 4th clutches.
11. If either end of the special tool is set over an area of
the spring retainer that is unsupported by the
return spring, the retainer m a y be damaged.
07GAE-PG40200 or
07GAE-PG4020A
(cont'd)
14-343