Honda ACCORD HYBRID 2005 Service Manual page 1178

Shafts and Clutches
C l u t c h R e a s s e m b l y
Special Tools Required
• Clutch spring compressor attachment
07LAE-PX40100 or 07HAE-PL50101
• Clutch spring compressor bolt assembly
07GAE-PG40200 or 07GAE-PG4020A
1. Soak the clutch discs t h o r o u g h l y in ATF for a
m i n i m u m of 30 minutes.
2. Install the new O-rings (A) on the 1st-hold clutch
piston (B), and install the 1st-hold clutch piston in
the 1st clutch piston (C).
3. Install the new O-rings (A) on the 1st clutch piston
(B), and install the 1st/1st-hold clutch piston in the
1st/1st-hold clutch d r u m (C) w h i l e applying
pressure and rotating to ensure proper seating. Do
not pinch the O-ring.
4. Install the O-rings (A) on the 2nd, 3rd, 4th, and 5th
clutch piston (B).
A
5. Install the clutch pistons in the clutch d r u m s (C)
w h i l e applying pressure and rotating to ensure
proper seating. Do not pinch the O-ring.
6. Install the return spring (A) and spring retainer (B)
of the 1st, 2nd, 3rd, and 4th clutches, and position
the snap ring (C) on the spring retainer.
A
14-342