Honda ACCORD HYBRID 2005 Service Manual page 1500

Dashboard
P a s s e n g e r ' s D a s h b o a r d L o w e r
C o v e r R e m o v a l / I n s t a l l a t i o n
NOTE: Take care not to scratch the dashboard and
related parts.
1. Remove the passenger's dashboard lower cover
(A).
- 1 Gently pull d o w n the edge nearest the glove
box to detach the clips.
- 2 Pull the cover away to release the pins (B) f r o m
the holders (C).
Fastener Locations
> : Clip, 3
2. Install the cover in the reverse order of removal.
D a s h b o a r d S i d e V e n t R e m o v a l /
I n s t a l l a t i o n
Special Tools Required
KTC t r i m tool set SOJATP2014 *
• Available through the A m e r i c a n Honda Tool and
Equipment Program; call 888-424-6857
Driver's
NOTE:
• Take care not to scratch the dashboard and related
parts.
• Put on gloves to protect y o u r hands.
• Use the appropriate tool f r o m the KTC t r i m tool set to
avoid damage w h e n prying c o m p o n e n t s .
1. Remove the driver's dashboard lower cover
(see page 20-67).
2. Push up the lower clips by hand, then push out the
driver's side vent (A) by releasing the upper and
side tabs (B).
Fastener Locations
t> : Clip, 2
3. Reinstall the tab portions of the vent first, then push
the clip portions into place securely.
20-72