Honda ACCORD HYBRID 2005 Service Manual page 1193

© 0
72. Install the 3rd clutch transmission fluid pressure
switch (A) w i t h the new sealing washer (B). Tighten
the switch w i t h the metal part.
G 6 x 1 . 0 m m
6 x 1 . 0 m m 12 N-m
12 N m (1.2 k g f m ,
73. Install the ATF cooler lines (C) w i t h the new sealing
washers (D) and the line bolts (E).
74. Install the connector bracket (F), and secure the
ATF lines w i t h the 6.0 m m bolt (G). Tighten the
bolts to 12 N-m (1.2 kgf-m, 8.7 I b f f t ) .
75. Install the ATF temperature sensor (H) w i t h the new
O-ring (I). Install the harness c l a m p on the clamp
bracket, and install the connector on the connector
bracket.
76. Install the 2nd clutch transmission fluid pressure
switch (A) w i t h the new sealing washer (B). Tighten
the switch w i t h the metal part.
B
77. Install the ATF dipstick tube (A) w i t h the new O-ring
(B).
78. Install the ATF dipstick (C) in the tube.
(cont'd)
14-357