Honda ACCORD HYBRID 2005 Service Manual page 1071

25. Disconnect the 2nd clutch transmission fluid
pressure switch connector.
26. Remove the ATF cooler hoses (A) f r o m the ATF
cooler lines (B). Turn the ends of the cooler hoses
up to prevent ATF f r o m f l o w i n g o u t then plug the
cooler hoses and lines.
27. Check for any signs of leakage at the hose joints.
28. Remove the connector bracket f r o m the engine
f r o n t cylinder head; use the bracket bolt hole to
attach the engine hanger balancer bar front arm
29. Disconnect the solenoid valve connector (A), then
remove the bracket (B) f r o m the engine rear
cylinder head; use the bracket bolt hole to attach
the engine hanger balancer bar rear a r m .
A
(cont'd)
14-235