Honda ACCORD HYBRID 2005 Service Manual page 1050

Automatic Transmission
A / T Clutch Pressure Control Solenoid Valve B Test (cont'd)
12. Remove the nuts securing the shift cable bracket
(A).
13. Remove the spring clip/washer (B) and the control
pin (C), then separate the shift cable end (D) f r o m
the control lever (E).
14. Disconnect the connectors f r o m the A/T clutch
pressure control solenoid valve A, B, solenoid
harness, transmission range s w i t c h , ATF
temperature sensor, output shaft (countershaft)
speed sensor, input shaft (mainshaft) speed sensor,
3rd clutch transmission fluid pressure switch, and
4th clutch transmission fluid pressure switch.
15. Remove the bolt securing the harness cover (A).
6 x 1.0 m m
12 N-m
(1.2 k g f m ,
8.7 Ibfft)
16. Remove the A/T clutch pressure control solenoid
valve A and B, ATF pipes (C), and gasket (D).
6 x 1.0 m m
12 N-m
(1.2 kgfm, 8.7 Ibfft)
17. Check the fluid passage of the solenoid valve for
contamination.
14-214