Honda ACCORD HYBRID 2005 Service Manual page 1117

P a r k P i n S w i t c h T e s t
1. Remove the center console (see page 20-62).
2. Disconnect the park pin switch/A/T gear position
indicator panel light connector.
T e r m i n a l side of male t e r m i n a l s
3. Shift the shift lever into the P position, then check
for continuity between connector terminals No. 3
and No. 4. There should be no continuity.
4. Shift out of the P position, and check for continuity
between terminals No. 3 and No. 4. There should
be continuity.
5. If the park pin switch is faulty, replace the shift
lever bracket base assembly; the park pin switch is
not available separately (see page 14-281).
6. Install the center console (see page 20-62).
P a r k P i n S w i t c h R e p l a c e m e n t
NOTE: The park pin switch is not available f r o m the
shift lever bracket base assembly.
1. Remove the shift lever (see page 14-257).
2. Disassemble the shift lever (see page 14-260).
3. Replace the shift lever bracket base assembly, and
assemble the shift lever.
4. Install the shift lever (see page 14-258).
5. Install the center console (see page 20-62).
14-281